The R300DCT is the perfect Disc Cutter, built for cutting, bricks, blocks, paving, reinforced concrete and more. The R300DCT has an improved cut capacity of 115mm vs the previous 305mm model, making this one of the deepest cutting 300mm machines on the market!
With a 2400w *high-torque electric motor delivering consistent peak power, the R300DCT powers through the toughest masonry cutting tasks indoors and outdoors. With no fuel, no fumes or exhaust gases to worry about you can use the R300DCT anywhere. With no engine to service, the R300DCT Electric Disc Cutter is the King of cost-effective concrete saws.
Built for making long, low cuts in slab and easy vertical cuts in brickwork the R300DCT features a wheeled skid plate to take the strain off making accurate cuts, it even lets you put the tool down with the blade still spinning. Our new 300mm Electric Disc Cutter also showcases our Power Protect Technology, shielding internal parts from dust & water ingress for longer tool life and of course, it comes backed by our 3-year guarantee.
- Huge Cut Capacity. The all-new Evolution 300mm /12-inch concrete cutting saw can cut up to 115mm /4-1/2 inch deep! That’s more capacity than most leading petrol-powered saws.
- High Torque Motor. Delivers consistent peak power and prevents the machine from stalling under heavy-load.
- Electronic brake Safety counts and that’s why all our new DCT Electric Disc Cutters feature an advanced electronic brake control for the disc
- Low Maintenance vs petrol-powered saws. No pull chords, no petrol and no servicing, saves you time and money.
- Steel Front Handle. With rubber over-mould gives the user total control and lives up to the toughest jobs. The full wrap-around design makes it easy to make a cut at any angle.
- Large Blade Coverage & Built-in Dust Port. With rubber cap for easy vacuum attachment, and protects the user from flying debris and optimises dust suppression and collection.
- Ergonomic Handle & Trigger. With rubber over-mould improves tool control and reduces user fatigue.
- Low Vibrations. The smooth yet powerful electric motor makes for easy operation and can be safely used for long periods of time. Plus there are no harmful fumes emitted making it safer to use.
- Balanced Weight. Optimised balance and even weight distribution puts the centre of gravity squarely between the handles for effortless use of the machine. Great for prolonged use.
- Adjustable Blade Guard. With single-handed operation allows for quick adjustments while holding the tool and keeping your hand away from the blade.
- Wheeled Skid Plate. Makes straight cuts at ground level effortless, and the metal skid plate protects the tool and lifts the blade off the ground so it can be put down with the blade spinning.
- On-board Tool Storage. One multi-tool for all machine adjustments with dedicated onboard storage.
All Evolution DCT models come equipped with our new Power Protect Technology to conquer the most demanding jobs and cut for years to come.
|Double insulated motor coil protects the motor from dust ingress and vastly improves motor life. Features a robust powder coating for complete protection.|
|Unique aerodynamic fan system increases airflow through the motor for better cooling during heavy-duty use and expels dust.|
|Specially designed air vents prevent water and other debris from entering the motor housing to make it safe for use in all conditions.|
|Built-in drainage holes allow any water to escape from inside the machine body and prevents damage to internal parts.|
|Power||2,400 / 1,600 watt (230v / 110v
|Plug||230 v UK mains plugs, 110V 32amp 3 pin round|
|Rated Speed||5,090 / 4,040rpm (230v /110v)|
|Max. Duty Cycle||20 Mins|
|Cable||3m /9 ft 10 in. Rubber Cable|
|Cutting Capacity at 90˚||115mm /4-1/2 in.|
|Blade Supplied||General Purpose Diamond Blade (D300SEG-CS2)|
|Blade Diameter||300mm /12 in.|
|Blade Bore / Arbor||20 & 22.2mm (Reversible flange)
|Sound Pressure Max. LPA||98.0dB(A) K=3dB(A)|
|Sound Power Level Max. LWA||109.0dB(A) K=3dB(A)|
|Handle Vibration Max. Level||6.15m/s2 K=1.5m/s2|
|R300DCT Disc Cutter||x1|
|Rubber Cap (Extraction Port)||x1|
|Hose Connector (R300DCT+ only)||x0|