Accessories

A mitre saw dust collection bag is ideal for keeping a cleaner working environment. Designed to fit the 185mm, 210mm and 255mm mitre saw models. Fe...

For a more effective way of collecting sawdust as you cut - connect your vacuum to your mitre saw with a dust port adaptor. Compatible with Evoluti...

Replacement splinter guard track cut strips for Evolution ST1400 and ST2800 circular saw tracks. Easy to apply with peel-back adhesive. Protects th...

One pair of fully adjustable Track Clamps for the original Evolution ST1400 & ST2800 (G1) Universal Circular Saw Tracks. These are also widely ...

Durable Carry Bag for any Evolution Circular Saw & more besides. Built rugged there's plenty of space for a 185mm Circular Saw, cordless tools,...

The Mitre Saw Accessory Pack contains: x1 Dust Bag, x1 Dust Port Adaptor, x1 Front Clamp and x1 Top Clamp. There are two Accessory packs available,...

A pair of accessory connecting rods for piecing together multiple lengths of Evolution's ST1400 and ST2800 Circular Saw tracks and most other compe...

This Bolt kit joins a pair of Evolution Mitre Saw Stand Rail Clamps to most Mitre Saws. This kit contains a full set of short & long mounting b...

DescriptionThe Evolution Hulk Plate Compactor paving pad allows you to use the Hulk Electro or Petrol Compactors when completing brick or block gro...

The R255SMS and R255SMS+ top clamp provides extra security when working with unstable workpieces. Perfect when working with different sized materia...

The R255SMS and R255SMS+ front clamp provides extra security when working with unstable workpieces and accomodates material up to 300mm wide. Featu...

The Evolution Cyclone Magnetic Swarf and Chip Collector Wand is the perfect tool to quickly clean up metal shavings, swarf and scrap pieces, but it...

For more effective way of collecting saw dust as you cut - connect your vacuum to your circular saw with a dust port adaptor. Compatible with Evolu...

Cross-Cut-Sled Compatible Trench-Cut Riving Knife for use with the R255TBL and R255TBL+ Next-generation Portable Table Saws from Evolution. This r...

The R210SMS/R210SMS+ mitre saw top clamp provides extra security when working with unstable workpieces. Perfect when working with different sized m...

Keep your work on track with the S210CCS Circular Saw Track Adapter. Quickly and easily turn your Heavy Duty Metal Cutting Circular Saw into a tra...

Low friction, plastic glide strips for the Evolution ST1400 and ST2800 Circular Saw Tracks. keep your tracks in tip top conditions and your circula...

Slide rail cover for the Evolution R255SMS and R255MS+ sliding Mitre Saws.

The Evolution HTA47 Chuck Adaptor screws into the back of our HTA 1/2" Twist Bit Chuck and allows it to fit any Mag Drill that accepts the standard...

Evolution HTA153 Chuck & Key 1/2 inch (EVOMAG28,42,50)

Slide rail cover for the Evolution R210SMS and R210SMS+ sliding Mitre Saws.

0-50mm Countersink bit with Weldon shank, suitable for Mag Drills with a maximum arbour size greater than 50mm such as our EVOMAG75. As long as you...

Evolution HTA030 Countersink 0-30mm (EVOMAG28,42,50,75)

Evolution Twister 140mm Mixer Paddle a larger Spiral Up-mix paddle for rapid mixing of big loads. Up-mix paddles provide optimum mixing for a wide ...

The Evolution track bag, available separately to easily store and transport additional circular saw track pieces. Available in 700mm and 1400mm sizes.

Allows you to use Annular Cutters with a machine that accepts a No 2 Morse Taper, Standard fitment for many Magdrills.

Fit a standard Annular Cutter to your Magdrill with this number 3 Morse Taper adaptor.

Standard twist bit drill chuck for the EVOMAG75 Mag Drill.

General Purpose / Plaster 120mm Up-mixing Spiral paddle Up-mix paddles provide optimum mixing for a wide range of sand and aggregate filled media. ...

Evolution HTA53 Chuck Arbor (Use with HTA54) (EVOMAG75)

Evolution HTA45 Chuck Adaptor v1 (EVOMAG50)

Evolution HTA46 Chuck Adaptor v2 (EVOMAG50)

Evolution HTA51 Chuck & Key 5/8 inch (EVOMAG50)