Products

Cross-Cut-Sled Compatible Trench-Cut Riving Knife for use with the R255TBL and R255TBL+ Next-generation Portable Table Saws from Evolution. This r...

Description225mm sanding discs suitable for the R225DWS Telescopic Drywall Sander and the EB225DWSHH Hand Held Drywall Sander. There are several pa...

Evolution Sanding Belts for the Mini palm sander. Ideal for Wood and Plastics. Mini Belt Dimensions: 40mm x 303mm. There are 3 packs available to c...

Low friction, plastic glide strips for the Evolution ST1400 and ST2800 Circular Saw Tracks. keep your tracks in tip top conditions and your circula...

One pair of fully adjustable Track Clamps for the original Evolution ST1400 & ST2800 (G1) Universal Circular Saw Tracks. These are also widely ...

The Evolution Cyclone Magnetic Swarf and Chip Collector Wand is the perfect tool to quickly clean up metal shavings, swarf and scrap pieces, but it...

Sold as a pack. This Guard Mechanism Kit will only fit the Evolution RAGE3-S and FURY3 210mm Sliding Mitre Saw. Please note: This is a redesigned m...

Evolution HTA030 Countersink 0-30mm (EVOMAG28,42,50,75)

Evolution HTA153 Chuck & Key 1/2 inch (EVOMAG28,42,50)

Allows you to use Annular Cutters with a machine that accepts a No 2 Morse Taper, Standard fitment for many Magdrills.

Fit a standard Annular Cutter to your Magdrill with this number 3 Morse Taper adaptor.

Evolution HTA45 Chuck Adaptor v1 (EVOMAG50)

Evolution HTA46 Chuck Adaptor v2 (EVOMAG50)

Evolution HTA51 Chuck & Key 5/8 inch (EVOMAG50)

Evolution HTA53 Chuck Arbor (Use with HTA54) (EVOMAG75)

Standard twist bit drill chuck for the EVOMAG75 Mag Drill.

0-50mm Countersink bit with Weldon shank, suitable for Mag Drills with a maximum arbour size greater than 50mm such as our EVOMAG75. As long as you...

Panel air filter for the Evolution Hulk Petrol Compactor

Replacement carburettor for the Evolution Hulk Petrol Compactor.

DescriptionThe Evolution Hulk Plate Compactor paving pad allows you to use the Hulk Electro or Petrol Compactors when completing brick or block gro...

The Evolution HTA47 Chuck Adaptor screws into the back of our HTA 1/2" Twist Bit Chuck and allows it to fit any Mag Drill that accepts the standard...

The Mitre Saw Accessory Pack contains: x1 Dust Bag, x1 Dust Port Adaptor, x1 Front Clamp and x1 Top Clamp. There are two Accessory packs available,...

A mitre saw dust collection bag is ideal for keeping a cleaner working environment. Designed to fit the 185mm, 210mm and 255mm mitre saw models. Fe...

This Bolt kit joins a pair of Evolution Mitre Saw Stand Rail Clamps to most Mitre Saws. This kit contains a full set of short & long mounting b...

13mm x 457mm long, continuous fabric sanding belts for the Evolution precision File Sander. Evolution Sanding Belts for the Precision File Sander. ...

For a more effective way of collecting sawdust as you cut - connect your vacuum to your mitre saw with a dust port adaptor. Compatible with Evoluti...

For more effective way of collecting saw dust as you cut - connect your vacuum to your circular saw with a dust port adaptor. Compatible with Evolu...

The R210SMS/R210SMS+ mitre saw top clamp provides extra security when working with unstable workpieces. Perfect when working with different sized m...

Slide rail cover for the Evolution R210SMS and R210SMS+ sliding Mitre Saws.

The R255SMS and R255SMS+ top clamp provides extra security when working with unstable workpieces. Perfect when working with different sized materia...